 | |  | |  | |  | |  | |  | |  | |  | |  | |  |
If you are replacing the tile above the tub please do this first. Please protect tub with a sheet of plywood
before pulling the tile off. Go ahead and grout the tile to the tub just don't caulk it.
• Do you have shower doors? Please remove doors before we arrive.
There is no warranty in the track area if they are left on. We strongly recommend removing them. Most
times people remove the doors and tracks and go to a curtain or new doors via www.mrshowerdoor.com
after the tub has been refinished.
(VERY IMPORTANT)
• Plumbing should be in good working order. Dripping faucets, and any future installation of hardware
should all be done prior to our arrival. Do not remove or disconnect the drain! However, we would
appreciate the removal of the overflow from the tub.
• Please remove all caulking on the tub surface prior to our arrival. Grout does not have to be removed. If
this is an issue for you I can do it for you.
• Please be sure to clean the tub well with an abrasive cleaner before we arrive to remove any soap film.
Excessively dirty tubs will incur additional cleaning charges.
• Please make sure the bathroom is cleared out of any loose articles, such as shower curtains, window
curtains, rugs, items on counters etc. Anything that isn’t in a cupboard or drawer, that can be removed
from the bathroom should be. I will do any necessary covering of walls and floors.
Please vacuum the bathroom as well to clean up all dust and hair. There's air movement and we don't
want it landing on your tub.
Is the toilet or vanity in the way of the front of the tub. I need at least a foot to get my spray gun in their to
spray the front of the tub. If in doubt please send me a picture.
• Do you have a bathroom window? Please make sure it opens, and that storm windows and screens are
functional prior to our arrival. (An exhaust fan gets placed in the window) If there is no bathroom window
please have a window available for me to run an exhaust hose out of.
Remove masking paper in 24 hours and caulk where the tile meets the tub.
Reinstall your trip lever (over flow plate) by dropping the weighted end into the overflow pipe, line up the
screw hole and reinstall the two screws. If a drain screen was removed, lay it over the drain, line up the
hole and install the screw.
before pulling the tile off. Go ahead and grout the tile to the tub just don't caulk it.
• Do you have shower doors? Please remove doors before we arrive.
There is no warranty in the track area if they are left on. We strongly recommend removing them. Most
times people remove the doors and tracks and go to a curtain or new doors via www.mrshowerdoor.com
after the tub has been refinished.
(VERY IMPORTANT)
• Plumbing should be in good working order. Dripping faucets, and any future installation of hardware
should all be done prior to our arrival. Do not remove or disconnect the drain! However, we would
appreciate the removal of the overflow from the tub.
• Please remove all caulking on the tub surface prior to our arrival. Grout does not have to be removed. If
this is an issue for you I can do it for you.
• Please be sure to clean the tub well with an abrasive cleaner before we arrive to remove any soap film.
Excessively dirty tubs will incur additional cleaning charges.
• Please make sure the bathroom is cleared out of any loose articles, such as shower curtains, window
curtains, rugs, items on counters etc. Anything that isn’t in a cupboard or drawer, that can be removed
from the bathroom should be. I will do any necessary covering of walls and floors.
Please vacuum the bathroom as well to clean up all dust and hair. There's air movement and we don't
want it landing on your tub.
Is the toilet or vanity in the way of the front of the tub. I need at least a foot to get my spray gun in their to
spray the front of the tub. If in doubt please send me a picture.
• Do you have a bathroom window? Please make sure it opens, and that storm windows and screens are
functional prior to our arrival. (An exhaust fan gets placed in the window) If there is no bathroom window
please have a window available for me to run an exhaust hose out of.
Remove masking paper in 24 hours and caulk where the tile meets the tub.
Reinstall your trip lever (over flow plate) by dropping the weighted end into the overflow pipe, line up the
screw hole and reinstall the two screws. If a drain screen was removed, lay it over the drain, line up the
hole and install the screw.
| Contractors Especially Please Read. Please don't schedule me on the same day that you are having other work done in the house such as carpentry work, Sheetrocking/Taping, Floor sanding. I am not responsible for dust landing on your tubs finish. I will need electricity, Hot water and access to the bathroom. (no joke, someone said I would have to climb into an upstairs window) Please clean the bathroom of all dirt and dust. This is a sprayed on application and you don't want dirt, hair and dust in the tubs finish. |
| | | | | | | | | | | | | | | | | | |
Bathtub Rx, LLC 6 Peaceful Ln, Norwalk, CT 06851 203-984-3931
203-984-3931
PREPWORK PAGE